Towing Apps and How They are Changing the Market

Towing and Technology – two unlikely industries that seem to fit together like a glove. The surge of towing apps has bridged the gap between a long-established sector and modern innovation — connecting the client to the company with just a click.

For years, the towing industry has stuck with the cookie-cutter way of doing business says Towing Tallahassee. A customer calls to provide information and waits for the tow truck to arrive. Now, technological advancements have taken over the marketing, communication, and navigation side of things through towing applications.

Continue reading “Towing Apps and How They are Changing the Market”

RADIATION DETECTION MONITORS


Written by: graceunemy

Introduction

Several electronic tools are used to detect radiation in the air. They vary in their use and application, and they also differ in their effectiveness as well.

They include up to but not limited to the Geiger Muller Detectors, the Alpha Radiation Survey Meter, the Dose Rate Meter, the Personal Dosimeters, and the Portal Monitors. There are also some Newer Radiation Detection devices that are effective in pointing out radiation waves.

The Geiger Mueller Detectors

The Geiger Mueller, also known as the GM Detectors, is a device that does not only detect but also measure radiation in the environment. This device is also used by radon mitigation companies. This device provides real time measurements and is accurate in checking out for contaminated waves in the environment. The Geiger Mueller Detector works simply. The radiation energy this machine detects is known as a count. All devices used to detect radiation only identify a percentage of the full radiation energy. This is because radioactive energy can decay or disintegrate with time. Any rate of this energy detected by a device is known as efficiency.

Therefore, it is clear that to obtain data, efficiency conversion has to be carried out. The conversion is carried out in factors that can be useful in some ways. First, the elements can determine the actual disintegrations that the radioactive material makes per second or minute. The factors can also specify the actual disintegrations that the material makes per unit of time. This measurement is done in units of curies. There are several advantages to using this device. The first is that the measures are real time. The second advantage is that this device is simple in application. Subjects, however, cannot use this device in adverse conditions like underwater.

Continue reading “RADIATION DETECTION MONITORS”

How does an ECU Work in a Car?

ECU

Witten by: Towing Newport News

The ECU was adopted in the first electronic injection systems in cars. In these first systems, the central units managed the operation of the engine and were “fed” by signals sent by the sensors of the position of the butterfly and position of the crankshaft. With these signals, it is possible to roughly calculate how much air is entering the throttle and the moment the ignition system fires the spark (since the ignition point is based on the angular position of the crankshaft). The ECU then processes these input signals and, based on its values, sends a signal to open the injection valves and thus injects the fuel at the required time and for the time needed.

Bosch D-Jetronic, the first electronic injection: only a single ECU.

Later, they joined the electronic ignition control which had existed since the 1960s but it acted independently – so much so that there were cars with electronic injection and mechanical ignition, if some Mercedes of the 1970s, for example. With the integration of the ignition control to the ECU, it started issuing output signals also to the ignition coil, allowing advance or delay of the ignition point. This also led to the creation of the detonation sensors, capable of detecting when the air-fuel mixture is ignited by compression before ignition, which causes the pin strike, which compromises the durability of the engine.

Continue reading “How does an ECU Work in a Car?”

We’re Online!

Welcome to costalcomputercorporation.com 

We are a professional IT blog with multiple topics to discuss. I hope our site brings value to the community. Check back in with us to read our upcoming blogs. If you have any questions please do not hesitate to contact us at info@costalcomputercorporation.com

RSS
Follow by Email